Specifications – Zebra Z-Select™ 2000T Tag
Material Construction
| Raw Material Number – Zebra Z-Select™ 2000T Tag | 68130RM |
| Facestock | Thermal transfer gloss white polyester 2.0 mil/50.8 microns |
| Adhesive | High-performance permanent acrylic adhesive 0.8 mil/20.32 microns |
| Liner | 50 lb/74 gsm semi-bleached kraft liner 3.0 mil/76.2 microns |
| Total Thickness (+/-10%) |
5.8 mil/147.3 microns |
| Environment | Indoor use; Outdoor use up to 3 years |
Temperature Performance
| Minimum Application Temperature1 | 50º F/ 10º C |
| Service Temperature Range2 | -40º F to 302º F/-40º C to 150º C |
Recommended Printers and Ribbons
| Printers | Thermal transfer printer (ribbon required); use Zebra desktop, mid-range and high-performance thermal printers for optimal performance |
| Ribbons | Compatible with Zebra 6200, 5095 and 5100 resin ribbons for optimal performance |
Adhesive Strength
| Stainless Steel | 5 minute dwell time: 27 oz/in. |
| 24 hour dwell time: 30 oz/in. | |
| Polycarbonate | 5 minute dwell time: 38 oz/in. |
| 24 hour dwell time: 48 oz/in. | |
| Polyethylene | 5 minute dwell time: 15 oz/in. |
| 24 hour dwell time: 16 oz/in. |
Product Performance and Suitability
| Recommended storage conditions |
1 year duration when stored at 72º F/22º C at 50% RH |
| Expected life span in application3 |
Indoor and outdoor up to 3 years |
Material Testing in End Application
| The information contained in this document is to be used for guidance only and is not intended for use in setting specifications. All purchasers of Zebra products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application. |
Warranty
| Supplies are warranted against defects in workmanship and materials for a period of 1 (one) year from the date of shipment. For the complete warranty statement, please visit |
Footnotes
| 1. When the label is applied, the environment and surface should be above this temperature. 2. Following correct application and appropriate dwell time (usually 24hrs) the media will withstand this temperature range. 3. Following correct application and appropriate dwell time (usually 24hrs) we expect, but do not warrant, a life span as indicated. |
